Synedica Europe
Reading security chip
Locating the official record for your PT-141 10 mg Complete Peptide Kit
Official product page · opened from your box chip
PT-141 10 mg
You are on the official Synedica page for the kit in your hands. Compare the details below with your box, then confirm the security code to prove the unit was registered by our laboratory in the United Kingdom.
- Category
- Peptide
- Total strength
- 10 mg
- Presentation
- 1 lyophilised vial
- Origin
- United Kingdom
Step 01 of 06
Compare your box with this page
Everything printed on your box must match the details above. If any line is different, stop and contact us before using the product.
- Peptide name printed on the box reads PT-141
- Strength reads 10 mg
- Batch number on the box matches the vial label
- Expiry date is printed and still valid
- Vial cap is sealed and has never been pierced
- Box shows the Synedica holographic seal
Holographic seal
Intact and tamper-evident.
Scratch-off panel
Untouched until you scratch it.
NFC chip
Opens this page only.
Step 02 of 06
Verify your box code
Scratch the security panel on your box and enter the code below. It is checked live against the official Synedica registry.
Verify Authenticity
Enter the code from your Synedica box PEPTIDE KIT. It starts with SY followed by 5–6 digits.
Buying original means buying safety. Questions? Contact support
SSL Secure
Encrypted
UK Origin
Certified
Good Mfg
Practice
3-Layer Protection on Every Kit.
Every Synedica kit goes through a strict security process so you receive exactly what you ordered: sealed, verified and 100% authentic.
Scratch-off QR Code
Unique hidden code under a scratch-off layer. Scan to confirm your batch in our official system.
Holographic Seal
Tamper-evident holographic seal that guarantees your box arrived sealed and unopened from the UK.
NFC TAP BOX
Tap your phone on the box to open the official product page instantly — no typing required.
Verify Authenticity
Enter the code from your Synedica box.
It starts with SY followed by 5–6 digits.
Buying original means buying safety. Questions? Contact support
SSL Secure
Encrypted
UK Origin
Certified
Good Mfg
Practice
Step 03 of 06
What's included in your kit
01 × Peptide vial
Lyophilised powder, sealed under vacuum with flip-off cap.
01 × BAC water 3 ml
Bacteriostatic water USP for reconstitution of the vial.
10 × 31G extra-fine insulin syringes
Sterile, single-use, graduated for precise low volumes.
01 × 3 ml reconstitution syringe
Used only to transfer the BAC water into the peptide vial.
10 × Isopropyl alcohol wipes
70% IPA pads to sanitise vial stoppers and the work area.
01 × Sealed security box
Holographic seal, scratch-off code panel and NFC chip.
Step 04 of 06
How to reconstitute your vial
Work on a clean surface, with clean hands, using only the sterile items supplied in your kit.
Resulting concentration
10 mg + 3 ml BAC water = 3.33 mg per ml
- 1
Prepare and sanitise
Wash your hands, clear a flat surface and open one alcohol wipe. Clean the rubber stopper of both the peptide vial and the BAC water vial, then let them dry.
- 2
Draw the BAC water
Using the 3 ml reconstitution syringe, draw the full 3 ml of bacteriostatic water from its vial.
- 3
Add the water slowly
Insert the needle at an angle and let the water run down the inner glass wall — never spray it directly onto the powder, which can damage the peptide.
- 4
Dissolve without shaking
Roll or swirl the vial gently between your fingers until the solution is completely clear. Never shake. Small bubbles are normal and settle on their own.
- 5
Label and refrigerate
Write the reconstitution date on the vial and place it in the fridge. Discard the reconstitution syringe after this single use.
- 6
Withdraw with a fresh syringe
For each withdrawal, wipe the stopper again and use a new sterile 31G insulin syringe. Never reuse a syringe or needle.
Step 05 of 06
Storage & stability
Before reconstitution
The lyophilised vial can be kept at room temperature, protected from direct light and humidity.
After reconstitution
Keep refrigerated at 2–8 °C, upright and away from the freezer compartment.
Stability
Once reconstituted, the vial remains stable refrigerated for up to 180 days.
Step 06 of 06
Melanocortin pathway research
PT-141 (Bremelanotide) is a melanocortin-receptor agonist studied for its potential role in libido and sexual-function research pathways. It remains investigational and is not an approved treatment in this form.
If the code is not recognised
Do not use the product. Keep the box, the vial and any proof of purchase, then contact our compliance team so we can trace the unit. Synedica products offered far below market price outside official channels are frequently counterfeit.
Research use only. Not for human or veterinary consumption. This page provides handling information for laboratory research and does not constitute medical advice.
Synedica Newsroom
All stories











